Netfast Screen broadcast

1) Image incomplete on the client side?
Check the network connection first. Disable firewall and exchange the server and the client side to test.Adjust the network speed to a higher value in Settings on the server side. Transfer rate of the network adaptor might be too low. Recommend to change the network adaptor.
Set color to 16 bits on both server and client computer.
Conflict with other DirectX program might exist when broadcast.

2) Cannot receive broadcast image?
Perform Message or Lock function to test if the network works normally.

3) Multiple IP address exist, and cannot send or receive data.
If multiple IP address is detected -- in case there are multiple network adaptors or using a dial-up connection, you need to specify an IP for the program to use.For the server side, specify the IP address in Settings in the program menu.For the client side, disable any extra IP addresses on the computer to test. Or create a file "cset.ini" under the program install path, and add the following text in this file:
[setting]
clientip=x.x.x.x (x.x.x.x is the IP specified address)

4) How to broadcast voice?
Please use Recorder in Windows Accessory to test it. It can broadcast the audio from microphone, or the playing sound on local computer. Note that Stereo Mix in Volume Control should be selected.

5) About disable client to exit
The Task Manager would disable if disable client to exit
You may use other software instead of Task Manager,e.g. Process Explorer

6) About lock
The mykbfilt.sys must under the client program path if need lock CTRL+ALT+DEL
And need reboot computer once